UpComing Tradeshows

September 18-21, 2017
Exposibram 2017
Belo Horizonte, Minas Gerais – Brazil

November 17-19, 2017
Pacific Marine Expo 2017
Seattle, WA

November 29 - December 02, 2017
International Workboat Show 2017
New Orleans, LA

Back To Newsroom

Wichita Grinding Mill Clutch for Copper Mine Grinding Mill

A reliable clutch solution was required for a ball mill at one of the world’s largest (and oldest) open pit copper mines located in Mexico. The clutch’s primary role on the dual-pinion, direct-drive geared mill is to provide smooth starts during mill startup. When the mill is running, the clutch also serves as a torque “circuit breaker,” reducing costly repairs and downtime by protecting the pinion and ring gear from potential damage caused by large pieces of grinding material.

To meet the demanding mill application requirements, Wichita Clutch supplied a Model 360 Grinding Mill Clutch (GMC) with 60 in. diameter friction discs and a torque rating of 11,870,250 in.lbs. (1,341,158 Nm).

Wichita air-applied GMCs are specially designed to provide quick, smooth starts with limited current surge on heavy-duty geared grinding mills with large inertia loads. The clutches are typically positioned on the mill’s pinion shaft drive ring gear.

Wichita GMC models also utilize a special high energy absorbing, high-coefficient friction material for greater heat dissipation during mill jogging and inching operations. Units are equipped with a driving adapter that is designed to allow the clutch to be used in a shaft-to-shaft or through-shaft coupling arrangement. A quick-change feature enables replacement of any wearing clutch part without disturbing either shaft.

The Wichita Clutch airtube design combines all the best features of a disc type clutch with all the advantages of direct air engagement. It is the simplest and most trouble-free method of applying air pressure yet designed.

Wichita Clutch Grinding Mill Clutch

Highlights

  • Air-applied clutch with full-circle friction discs
  • Torque capacity not affected by centrifugal force
  • High-coefficient, high energy absorbing friction material
  • High heat dissipation for jogging and inching during routine maintenance
  • Quick-change ring allows easier access to friction discs
  • No adjustment or lubrication
  • Optional axial locking device available

Contact Information

Wichita Clutch (USA)
2800 Fisher Rd.
Wichita Falls, TX 76302 - USA
Toll Free: 1-800-964-3262
Phone: 940-723-3400
Fax: 940-723-3436
Email: wichita.info@wichitaclutch.com
www.wichitaclutch.com

Wichita Clutch (UK)
Ampthill Road
Bedford MK42 9RD - England
Phone: +44 (0) 1234 350311
Fax: +44 (0) 1234 350317
Email: clutch@wichita.co.uk
www.wichita.co.uk